Owners manual

2017+ CAN-AM

MAVERICK X3

REVERSE MOUNT

INSTALLATION INSTRUCTIONS

*THIS MOUNT FITS THE FOLLOWING LIGHTS:

(2) SR-M Series PRO

PRODUCT INCLUDES:

(1) Reverse Light Mount #41639

* LIGHTS SOLD SEPARATELY

IMPORTANT

THANK YOU FOR PURCHASING RIGID PRODUCTS FOR YOUR VEHICLE.

Please read through all of these Instructions and tips before proceeding with the installation.

We do our best to provide a simple installation process for all applications however

a professional installation is always recommended.

Always disconnect any power sources connected to your vehicle

before servicing fuses or electrical systems.

STEP 1

Remove the factory rear plastic by

removing the (5) T-40 torque bolts.

See Figure 1

FIGURE 1

PAGE 1
INSTALLATION INSTRUCTIONS 2017+ CAN-AM® MAVERICK X3® REVERSE MOUNT PRODUCT INCLUDES: (1) Reverse Light Mount #41639 * LIGHTS SOLD SEPARATELY *THIS MOUNT FITS THE FOLLOWING LIGHTS: (2) SR-M Series PRO® IMPORTANT THANK YOU FOR PURCHASING RIGID PRODUCTS FOR YOUR VEHICLE. Please read through all of these Instructions and tips before proceeding with the installation. We do our best to provide a simple installation process for all applications however a professional installation is always recommended.
PAGE 2
STEP 2 FIGURE 2 Mount the lights as shown below using the provided hardware that came with the lights. Make sure the light bracket itself is tight, once installed on the plastic, you will have to adjust and aim them properly. See Figure 2 STEP 3 FIGURE 3 Install the RIGID bracket as shown while pulling the front plastic away from the SXS. The bracket installs between the shock mount and plastic radiator mount.