Owners manual

INSTALLATION INSTRUCTIONS
IMPORTANT
1. Radiance lights are designed to operate from 9V-15V only. Using this product
on a 24V or higher system will cause permanent damage to electrical components.
2. Colored back-lighting and forward projecting LED’s are intended for off-road use only.
Consult your local, state and federal laws, rules and regulations to determine whether your
particular application/installation is authorized for use on a public highway.
MOUNTING INSTRUCTIONS - STRAIGHT BAR
A - 1/4” Nylon Locknuts (2) C - Compression Spacers (2)
B - Mounting Bracket (2) D - Light Bar
A. B. C. D.
1. Insert mounting brackets onto light as shown above. Secure hardware to a snug
position and mount your light in desired location.
2. The 10” light bars include bolts that slide into each side of light housing before
compression spacers and brackets are attached for mounting.
MOUNTING INSTRUCTIONS - CURVED BAR
A - 1/4” Nylon Locknuts (4) C - Mounting Bushing (2)
B - Mounting Bracket (2) D - 1/4 20x, 3/4 Hex Head
E - Light Bar
A. B. C. E.D.
1. Insert mounting brackets onto light as shown above. Secure hardware to a snug
position and mount your light in desired location.
RIGID