Owners manual

ADAPT | 14
DASH SWITCH OPERATION
F. RGB-W BACKLIGHTING CONTROL
Activates the RGB-W backlighting and allows the end user to control the color desired.
1. To program the RGB-W backlighting first turn on the backlighting by activating the controller. Next, press and hold the
RIGID button for 3 seconds or until the icon flashes.
2. Once in programming mode the backlighting will begin to color cycle and the RIGID font on the dash controller will
mirror the color in the Adapt light bar.
3. Once desired backlighting color appears press the RIGID switch to save the selected color.
**NOTE** Primary backlighting colors (red, green, blue, amber, and white) can quickly be selected by pressing the mode
up or mode down keys once the color cycle has been activated.
G. & H. USER DEFINED PRE SETS
Both buttons 7. & 8. Function as user defined preset button that will save primary projecting Adaptive modes and back
lighting color.
In order to program select desired Adaptive mode for primary projecting lights along with any backlighting color desired.
Press and hold the desired preset button and those settings are saved. Once the settings are saved the preset icon will
flash confirming programming is complete.