Owners manual

ADAPT | 13
A. POWER ACTIVATION
Will activate the power to the primary projecting LED’s.
B. ADAPTIVE MODE
Will activate the Adaptive mode and vary the primary projecting beam pattern based on vehicle speed.
B1. To program the Adaptive mode based on vehicle speed simply drive to desired vehicle speed for Mode 8 (full
spot mode) and press the Adaptive mode button for 3 seconds or until the button flashes to save the setting.
B2. Once programming is complete the Adaptive mode will incrementally change modes based on vehicle speed
and no additional programming is needed.
**NOTE** GPS Module (sold separately) is required for Adaptive Mode Feature to function.
C. MODE SELECT DOWN
Will change Adapt modes (beam patterns) down incrementally from mode 8 to mode 1.
D. MODE SELECT UP
Will change Adapt modes (beam patterns) up incrementally from mode 1 to mode 8.
E. MODE INDICATOR
LED indicators will display the current mode selected and allow the end user to know what light mode they are
in at a glance.
DASH SWITCH OPERATION