Installation Instructions

6-Thread the short strap piece back through the center
buckle (Fig 17) and tighten.
1 Year Manufacturer’s Limited Warranty
www.rightlinegear.com/product-warranty.html
5-Run the long strap piece over or around the dry bag(s).
Adjust its length by moving the tri-glide (Fig 16).
4-Wrap the long strap piece around an opposite side
truck bed corner cleat, thread its end through its loop, and
pull tight.
2-Decide how you will run the straps over or around the
dry bag(s).
7-Repeat steps 2 – 6 for each additional strap.
3-Unthread the short strap piece from the buckle, wrap it
around one of the truck bed corner cleats, thread its end
through its loop, and pull tight (Fig 15).
Attach The Dry Bag(s) To A Truck Bed
Fig 16 Fig 17
Fig 15
Tri-glide
1-Lift the bag(s) into your truck bed (Fig 11). Position the
bag(s) standing up (Fig 12) or laying down (Fig 13 and
Fig 14).
Each of the (4) included straps has (2) strap pieces
connected through a center buckle.
Fig 11 Fig 12
Fig 13 Fig 14