Users Manual

Ending a Monitoring Session

SENSOR AND TRANSMITTER REMOVAL

Once the session has ended, follow these steps to remove your sensor and transmitter:

1. Grip the edge of the patch attached to your skin. Slowly pull upwards to peel it off.

2. Pick up the sensor base and transmitter. Note that one edge of the base has a notch.

3. Locate a point two-thirds along the length of the base and across from the notch. Then pinch

firmly at this point with your thumb and index fingers. While you do so, grip a corner of the notched

edge of the sensor base with your other hand.

4. Press down firmly with both your hands to bend the base away from the transmitter.

5. The transmitter will pop out as you bend the base. You will hear a click as the transmitter detaches.

6. Discard the sensor according to local regulations.

NOTE :

Do not throw away a HM312 Transmitter. HM312 Transmitters are reusable after recharging.

You may discard disposable HM310 transmitters.