Users Manual

Set Up Your RIGHTEST CGMs

Attach your transmitter after you insert a sensor.

• If you are using the rechargeable transmitter (HM312), dock your spare transmitter in the

transmitter charger. Store both the transmitter and its charger in the storage vial provided with

your RIGHTEST CGMs. Before attaching the rechargeable transmitter (HM312), make sure it is fully

charged. Do not remove your transmitter until your sensor session is over.

• Single-use transmitter (HM310) has sufficient battery life to function as intended. Discard

the transmitter (HM310) according to local regulations after each use.

Follow these steps to install your Transmitter:

1. Get your transmitter.

2. If necessary, clean the transmitter with an alcohol wipe. While

you do so, do not touch or scratch its metal components

located at the bottom.

NOTE :

If using the re-chargeable transmitter (HM312), be sure your

transmitter is fully charged every time you start with a new

sensor.

NOTE :

Wipe the bottom of transmitter with a dry cloth or an

alcohol pad. Failure to clean it may cause it to deteriorate

and harden over time, resulting in malfunction.