Users Manual
34
Set Up Your RIGHTEST CGMs
VI. SET UP YOUR RIGHTEST CGMS
Before setting up your RIGHTEST CGMs, make sure you have everything you need:
The following steps describe using receiver (HR310) to make a sensor-transmitter pair. If the
instructions provided do not work, the receiver (HR310) will display an error message. Every time
you begin the use of a new sensor, scan the codes on both the sensor inserter package and
on the transmitter. The system will not start if you fail to scan the codes.
• Sensor Inserter Package
• Alcohol Wipes
• Transmitter • Receiver (HR310)
• Your Blood Glucose (BG) Meter
PAIRING THE SENSOR AND TRANSMITTER USING NFC
PRECAUTIONS :
Scan the NFC Tags First before Connecting to the System: Each sensor has its
unique code established on the tag attached on the sensor inserter package. The
transmitter’s code is located right beneath its top plastic cover where you see a mark.
Every time you begin the use of a new sensor, scan both codes to ensure successful system
connections. The system will not start if you fail to scan the codes.