BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 BMD-SRA-1 Module for Bluetooth 4.2 LE 1. Ordering Information Email modules@rigado.com for quotes. Part Number BMD-SRA-1-A-T Description BMD-SRA-1 module, nRF52832-QFAA, IS25LQ032B-JBLE, tray packaging Table 1 – Ordering Part Numbers 2. Block Diagram BMD-SRA-1 Module nRF52832 64 kB RAM SWD Debug & Programming Core LDO DC/DC Buck Regulator Bulk Capacitors Accel Address Resolver ARM Cortex-M4F @ 64MHz 2.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 Table of Contents 1. 2. 3. 4. 4.1 5. 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 6. 6.1 6.1.1 6.2 7. 7.1 8. 8.1 9. 9.1 9.2 9.3 9.4 9.5 9.6 9.7 10. 10.1 11. 12. 13. 14. ORDERING INFORMATION......................................................................................................................................................1 BLOCK DIAGRAM ...........................................................................................................
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 3. Quick Specifications Bluetooth Version 4.2 (Bluetooth Smart) Concurrent Central & Peripheral (S132) Security AES-128 LE connections Up to 8 as Central, 1 as Peripheral, Observer, Broadcaster (S132) Radio Frequency 2.360GHz to 2.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 4. Pin Descriptions 4.1 BMD-SRA-1 Figure 2 – BMD-SRA-1 Pin out Pin A-1 A-2 A-3 A-8 A-9 A-10 A-12 A-18 A-19 A-20 B-2 B-4 B-5 B-8 B-9 B-10 B-11 B-12 A-13 BMD-SRA-1-DS v1.0 Name P0.28 P0.31 P0.00 P0.01 P0.02 P0.03 P0.21 P0.30 P0.29 P0.27 P0.12 P0.18 P0.20 P0.19 P0.17 P0.16 P0.11 P0.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 Pin A-11 A-17, B-6 A-4, B-1, B-3, B-7 A-5, A-6, A-7, A-14, A-15, A-16 Name SWDIO VCC GND Direction In/Out Power Power Description SWD IO +2.3V to +3.6V Electrical Ground NC N/A No Connect Table 3 – BMD-SRA-1/301 Pin Descriptions 5. Electrical Specifications 5.1 Absolute Maximum Ratings Symbol Parameter Min. Max. Unit VCC_MAX Voltage on supply pin -0.3 3.9 V VIO_MAX Voltage on GPIO pins (VCC > 3.6V) -0.3 3.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 RPU Pull-up Resistance 11 13 16 kΩ RPD Pull-down Resistance 11 13 16 kΩ Table 6 – GPIO 5.4 Module RESET GPIO pin P0.21 may be used for a hardware reset. In order to utilize P0.21 as a hardware reset, the UICR registers PSELRESET[0] and ̅̅̅̅̅̅̅̅, the internal pull-up is automatically PSELRESET[1] must be set alike, to the value of 0x7FFFFF15. When P0.21 is programmed as RESET ̅̅̅̅̅̅̅̅. enabled.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 Figure 3 – SPI Flash Circuit 5.8 RTC Thermistor The module includes a NTC thermistor circuit for measuring on board temperature. The circuit can be found in Figure 4. The RTC thermistor is the Murata NCP15WM474J03RC and is connected to AIN4 (P0.04) on the nRF52832. Figure 4 – RTC Thermistor Circuit 6. Firmware All modules are shipped with blank from the factory, except the Rigado MAC address is programmed into the UICR. 6.
BMD-SRA-1 Module Datasheet Bluetooth 4.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 7. Mechanical Data 7.1 BMD-SRA-1 Dimensions Figure 5 – BMD-SRA-1 Module Dimensions (All dimensions are in mm) 8. Module Marking 8.1 BMD-SRA-1 Module Marking Figure 6 – BMD-SRA-1 Module Marking – Rev A BMD-SRA-1-DS v1.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 9. Regulatory Statements 9.1 FCC Statement: This device has been tested and found to comply with part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 OEM integrator is still responsible for testing their end-product for any additional compliance requirements with this module installed (for example, digital device emission, PC peripheral requirements, etc.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 9.3 IC Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 9.5 CE Regulatory: The BMD-SRA-1 modules are tested and compliant against the following standards. OEM integrators should consult with qualified test house to verify all regulatory requirements have been met for their complete device. From Directive 2006/95/EC: EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 From R&TTE Directive 1999/5/EC: ETSI EN 300 328 V 1.9.1 From Directive 2004/108/EC: ETSI EN 301 489-1 V1.9.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 10. Solder Reflow Temperature-Time Profile Figure 7 – Reflow Profile for Lead Free Solder 10.1 Moisture Sensitivity Level The BMD-SRA-1 is rated for MSL 3, 168-hour floor life after opening. 11. Cautions 1) The guidelines of this document should be followed in order to assure proper performance of the module. 2) This product is for use in office, business, and residential applications, but not medical devices. 3) This module may short-circuit.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 12. Life Support Policy This product is not designed to be used in a life support device or system, or in applications where there is potential for a failure or malfunction to, directly or indirectly, cause significant injury. By using this product in an application that poses these risks, such as described above, the customer is agreeing to indemnify Rigado for any damages that result. BMD-SRA-1-DS v1.
BMD-SRA-1 Module Datasheet Bluetooth 4.2 LE October 25, 2016 13. Document History Revision Date Changes / Notes 0.8 0.9 1.0 9/22/2016 9/29/2016 10/25/2016 Initial preliminary release Updated mechanical drawing Updated certification status 14. Related Documents Nordic Documents: Visit infocenter.nordicsemi.com for a comprehensive library of Nordic technical documentation. nRF52832 – nRF52832 Product Specification S132-SDS – nRF52832 S132 Soft Device Specification BMD-SRA-1-DS v1.
