User's Guide

Rigado CA-55 User Guide v0.5
4
2 Cascade Antenna Hardware
2.1 Specifications
Processor
STM32H750 480MHz, 32bit ARM® Cortex™-M7
Memory
Memory (
MCU
Internal)
1 MByte RAM, 128 Kbytes Flash
Memory (Flash) 8 MByte QSPI NOR Flash, 8 Mbyte NOR Flash
Bluetooth®
Radio 1, 2, 3, 4
Bluetooth® Version 5 (Bluetooth® Low Energy)
LE Connections N/A: Disabled in software
Frequency 2.402 to 2.480 GHz
Modulations GFSK at 1Mbps, 2Mbps data rates
Transmit Power N/A: Disabled in software
Receiver Sensitivity -96dBm, depending on modulation
Radio 5
Bluetooth® Version 5 (Bluetooth® Low Energy)
LE Connections Up to 20 connections
Frequency 2.402 to 2.480 GHz
Modulations GFSK at 1Mbps, 2Mbps data rates
Transmit Power 4dBm
Receiver Sensitivity -96dBm, depending on modulation
Ethernet
10/100 Base-T RJ-45 connector with PoE Support
Sensors
3-axis Accelerometer, Temperature Sensor
Battery
CR2032 Primary Cell (Optional)
Interface
Multi-color Status LED, “User” Button, Reset Button
Dimensions
Cascade 500 Enclosure
Length
Width
Height
225.8 mm
225.8 mm
61.5 mm
Hardware
Power supply 36-57 VDC (IEEE 802.3af) via Ethernet connector (RJ-45)
Temperature Range 0 to +60°C Operating, -20 to +70°C Storage
Certifications
CA-55 - PENDING
FCC / ISED / CE-RED / ENACOM / ANATEL / WPC / IFT / PTA / EAC / SABER /
ICASA+NRCS / UkrSEPRO / Bluetooth® SIG