User's Guide

Rigado CA-55 User Guide v0.5
11
4.3 Mounting Instructions
Rigado recommends mounting the Cascade Antenna horizontally (front of the unit, i.e., LED Ring, faces
down). This correctly orients the antennas and maximizes coverage.
1. If mounting on a wall or ceiling, use the mounting
plate as a template to mark the hole locations on
the mounting surface. If mounting to the wall,
use a 3/16” (5 mm) drill bit. If mounting to a
ceiling tile, use a 1/8” (3-4 mm) drill bit.
If a hole is needed for any cables, also mark this
in the appropriate cable opening space in the
mounting plate.
2. Attach the mounting plate to the surface using the appropriate method:
Junction
Box
Mounting
Using the guide printed on the mounting plate, align the holes in the plate with
the corresponding holes in the junction box. Use the screws provided with the
junction box to attach the plate.