Use and Care Manual

3 - 5 mm 3 - 5 mm 6 - 8 mm
length
model
712 mm 768 mm 1030 mm
Riga S II 4 1 7
Riga S III 4 1 11
Riga S IV 4 1 14
3 - 5 mm 3 - 5 mm 6 - 8 mm
length
model
768 mm 1030 mm 1030 mm
Riga III 1 4 11
Riga IV 1 4 14
Riga V 1 4 16
For the confi guration you need the following tools:
1 pc. Phillips screwdriver size 2
1 pc. foot-end wrench10 mm
1 pc. screwdriver
1 pc. allen key 3 mm (in the accessoires bag of the roof window)
1 pc. level
1 pc. stepladder
1 pc. fi le to remove any burrs on the profi les
1 pc. rubber hammer
1 pc. tape measure
You should be careful:
Wedge seals (V23) pull
apart the center!
Push the seal 3 - 5 mm between the soil profi le and the glazing.
Both within the greenhouse!
Important:
This compress the seals because they contract in cold weather!
Hexagonal screws can also be inser-
ted later in the plastic slider!
Plastic slider in the bottom door
frame, side and roof bars
numbers of wedge seals
pos.4-2
pos.4-1
pos.3-3
pos.1-5
-6
pos.2-1
pos.2-3.1
pos.2-3.1
pos.1-1
pos.1-9
pos.1-9
pos.1-5-4
pos.1-5-4
pos.1-5-6
pos.1-7
pos.1-6
pos.1-8
pos.3-2
3