Use and Care Manual

Assembly procedure - eaves -

shown enlarged side

rung (pos. 2.3)

The side rung (pos. 2.3) above into

the ridge proﬁ le and below into the

soil proﬁ le to glazing insert it. There,

the plate is threading.

If neccessary, timber and plastic

hammer to get help.

Tip:

Greasing plastic gliders perhaps a

little!

to step 11:

Insert further side glazing and

rungs.

The connecting plate (V4) from

inside screwed with screw hex M6 x

16 and nut M6.

to step 12:

to step 13:

step 11

ATTENTION! When using a foundation frame assemble in advance on this soil proﬁ le (see page 5, 6)

step 12

step 13

Insert the remaining plates and

rungs now.