Installation Guide

overview pos. description
type II type III type IV
6.
1
foundation frame profile
gable
2 2 2
6.2
foundation frame profile
eaves
2
80 1/16
2
121 11/16
2
163 3/8
V26
foundation frame corner bracket
40/40/2 x 105
4
4 1/8
4 4
V27
mounting bracket
(rung/foundation frame)
10
5 5/16
10 10
S12
S1
hexagonal screw M6 x 12 +
nut M6
20
20 20
overview pos. description
number/length in mm/ib
type III type IV type V
6.
1
foundation frame profile
gable
2
111 5/8
2
111 5/8
2
111 5/8
6.2
foundation frame profile
eaves
2
121 11/16
2
163 3/8
2
205
5
Foundation frame (optional)
Proles and accessories for foundation frame Riga S :
Proles and accessories for foundation frame
Riga : (V26/V27/S12/S1 as above)
!!!Warning: Use only according to instructions. See below!!!
This is the easiest and the safest foundation for a greenhouse.
The foundation frame hooks into the soil profile and the corners are
bolted together with a corner angle (V26). (See page 6). Use the
supplied self taping screws to firmly attach the soil profile to the
foundation frame.
Setting up the foundation frame
Dig a small ditch 4-5 inches deep in the dimensions of the foundation
frame.
Use paving stones or gravel under the horizontal sections as much as possible
to prevent the potential for the greenhouse to sag. Fill in the rest of the ditch with
earth.
It is also very practical to install tile or stone flooring, this prevents the
mud from splashing on the greenhouse during heavy rain.
In addition it makes work easier around the greenhouse, such as mowing the
lawn.
item no 9999 0078
item no 9999 0267
item no 9999 0124 + 9999 0128
ATTENTION! When using a foundation frame attach it to the soil
profile before these steps (see pages 5, 6)
number/length in inches
86 9/16
86 9/16
86 9/16
5 5/16
5 5/16
4 1/8
4 1/8