Installation Guide

model

foundation

W1 L1

greenhouse

W2 L2

Riga S II

96 7/8 91 5/16 91 3/4 85 1/16

Riga S III

98 1/16 133 1/16 91 3/4 126 3/4

Riga S IV

98 1/16 174 7/16 91 3/4 168 1/8

Riga III

122 13/16 133 1/16 116 9/16 126 3/4

Riga IV

122 13/16 174 7/16 116 9/16 168 1/8

Riga V

122 13/16 216 1/8 116 9/16 209 13/16

Foundation plan Riga S/Riga

Foundation of your greenhouse with a strip foundation

If you have not purchased a foundation frame secure the greenhouse by means of

a strip foundation. Create the foundation in accordance with the specified

dimensions below.

Concrete masonry units are also a good choice

Please make sure that the foundation is level in all directions.

Then anchor the greenhouse with the included mounting brackets (V15)(minimum)

Screws and anchors are not included.

exterior edge of the foundation

exterior edge of the greenhouse

upper edge of ground

frost-free ground

Suggestion: Assemble the lower frame (soil profiles 1.1/2.1,

soil profile corner V9) of the greenhouse to use as a template to

create a stone or concrete foundation. Make sure the corners

are square. This will prevent any errors in measurement.

Creating a stone/cement base is not required. The greenhouse can be

placed directly on the ground.

(Option) Opening for Door Drop Kit-3*ODIFT8JEFY*ODIFT5BMM

4 1/8

all dimensions in [in]