Installation Guide

3 - 5 mm 3 - 5 mm 6 - 8 mm
length
model
712 mm
(28.03 in)
768 mm
(30.24 in)
1030 mm
(40.55 in)
Riga S II 4 1 7
Riga S III 4 1 11
Riga S IV 4 1 1
4
3 - 5 mm 3 - 5 mm 6 - 8 mm
length
model
768 mm
(30.24 in)
1030 mm
(40.55 in)
1030 mm
(40.55 in)
Riga III 1 4 11
Riga IV 1 4 14
Riga V 1 4 16
3
For the conguration you need the following tools:
1 pc. Phillips screwdriver size 2
1 pc. 10mm Wrench
1 pc. 3mm allen key (included in the accessoires bag of the roof window)
1 pc. level
1 pc. stepladder
1 pc. file to remove any burrs on the profil
1 pc. rubber hammer
1 pc. tape measure
You should be careful:
Wedge seals (V23)
Pull them apart at the center.
Push the seal 3 - 5 mm between the soil profile and the glazing
Both inside the greenhouse!
Important: Compress the seals when you install them as they contract in
cold weather
If forgotten, hexagonal screws can
also be inserted later in the plastic
slider!
The plastic slider is located in the
bottom of the door frame, side and
roof bars.
Quantity of wedge seals
pos.4-2
pos.4-1
pos.3-3
pos.1-5-6
pos.2-1
pos.2-3.1
pos.2-3.1
pos.1-1
pos.1-9
pos.1-9
pos.1-5-4
pos.1-5-4
pos.1-5-6
pos.1-7
pos.1-6
pos.1-8
pos.3-2