Installation Guide

step 15

to step 16:

step 16

step 14

to step 14:

Attach the preassembled door

gable.

Refer to steps 8-9 for attachment

procedures.

For added stability install the inside

corner (V1). Use the self-tapping

screw pan head 4,2 x 13 (S9).

to step 15:

Install the door and windows

Instructions, see page 12-21.

Mounting roof window

wrong!!! right

The stabilization angle (pos 3.4) is

installed on both sides from inside. It

is attached to the side curve with

screw M6 x 16, nut M6 and washer A6,

4 screwed.

The stabilization angles (pos 3.4) are

also the rear supports for the top and

bottom shelf (see separate

instructions).

Glazing cut away in image

to show installation.

Assembly procedure -eaves-

ATTENTION! When using a foundation frame attach it to soil profile in advance (see pages 5, 6)

*Washer is optional