Installation Guide

Assembly roof window

corner with grub

screw (V13)

Side window profi e (pos. 4.1)

Top window profi e (pos.4.2)

(This profile requires no T-seal)

Recommendation!

It is advisable to use silicon to seal where the

polycarbonate enters the frame of the roof window. This

will prevent rain from dripping into the greenhouse.

See page 14 for details.

Attention: In the bottom cross profile insert two hex

screws M6 x 12 (S12) for the window opener!

Bottom window profile (pos. 4.2

corner bracket/roof window (V24)

automatic roof window opener

Mounting roof window

wrong!!!

right

Please push the roof window from the gable

end into the ridge profile and slide it into

position.

Install the automatic opener mount into the

crossbar.

Attach the roof window side profiles to the bottom roof

window profile using the corner brackets and the metal

corners with grub screws.

Insert the roof window glazing into the side/bottom profiles

you have assembled.

Attach the top roof window profile, tighten all grub screws

and insert T seal on the three lower sides of the roof window.