Users Manual

RECORD PLAYER | 4

IMPORTANT SAFETY INSTRUCTIONS

• Make sure the record player is properly ventilated and air circulates freely around the unit. Do not place the unit on a thick

carpet, bed, or any place where ventilation holes may be obstructed. Leave at least 4 inches of clearance around the unit.

• Do not place the unit:

– Near heat sources, radiators, or other heating sources;

– In high temperatures, high humidity, or direct sunlight;

– Where there is excess dirt and dust;

– Near open windows or any place where water may get into the unit;

– Near a strong magnetic ﬁeld;

– On an ampliﬁer or receiver.

• Before operating this unit, check the voltage to see if it is identical to the voltage of your local power supply.

• Clean the unit with clean dry cloth. Do not use liquid or aerosol cleaners.

• Clean LP records only with a dry and reliable cleaner. Do not use liquid or aerosol cleaners.

• When removing the power plug from the wall outlet, always pull on the plug directly. Do not pull on the cord.

• If the supply cord is damaged, turn o the unit immediately and unplug it from the wall outlet. Damaged cords must be replaced

by the manufacturer or a similarly qualiﬁed person to avoid hazards.

• To prevent possible hearing damage, avoid listening to high volume levels for long periods, or suddenly listening to high volume

levels.

• This appliance is intended for use by adults and experienced individuals. Children and individuals with reduced physical,

sensory, or mental capability, or lack of experience and knowledge, should not operate the unit unless they are supervised by

an adult or guardian responsible for their safety. Children should not play with this appliance.

• We are not liable for any damage caused by non-compliance with these instructions or any other improper use or mishandling

of this appliance.