Operation Manual

29
• Finally reattach the spring in place with a
torque of 6 – 8 Nm.
If the fork spring doesn’t engage without
play, both the spring position and that of
the black plastic cap can be adjusted. Exact
adjustment can require some experience,
and any problems should be referred to your
Birdy dealer.
HOW TO ADJUST THE STOPBOLTS
The new Birdy with monocoque frame has
two bolts with plastic head to adjust the
swingarms end position at folding. The front
bolt always has to be tightened completely.
The thread has to be secured with a small
drop of Loctite.
The bolt at the bottom has an additional
lock nut. Adjust the bolt to achieve minimal
play in the rear swingarm after pushing
down on the seatpost.