Operation Manual

23
• Check the t again. When the lever no
longer rotates, it is clamped properly.
• Lift the wheel several inches o of the
ground and give the top of the tire a little
whack. A securely fixed wheel should
remain in the frame.
• To check the handlebar quick release,
wedge the front wheel between your legs
and attempt to twist the handlebar. If it
doesn’t turn when you do this test, the
stem is secure.
SEATPOST CLAMP
The quick release nut has to be adjusted that
on the one hand the seatpost is fixed tight
enough and on the other hand the seat-
post can slide easily after opening the quick
release.
The position of the clamp should be with the
lever at the right side. When used with the
expedition carrier the clamp must be rotated
about 90 degrees.
ATTENTION!
Check the position of the clamp
regularly. The clamp should sit
completely ush with the seat tube
to ensure best clamping function.