Operation Manual

11
• Lift the Birdy by the handlebar, unfold the
front wheel and put the Birdy back on the
ground.
• Press briefly on the handlebar, so that the
front spring audibly engages in the front
swingarm catch.
• Adjust the seatpost to the correct height.
Turn the saddle so it is in line with the bike,
by lining up the front of the saddle with the
bottom bracket or along the main frame
tube.
• Check that the seatpost is securely xed
by grasping the front and rear of the sad-
dle and attempting to twist it. If it doesn’t
move at all, it’s secure.
04
06
03
• Lift the Birdy by the saddle, so that the rear
swingarm swings backwards.
• Engage the rear swingarm catch.
If you have one, unfold the kickstand.
ATTENTION!
Under no circumstances should
the stem be raised beyond the
‘MINIMUM INSERTION’ mark.
Check that the pin engages in one
of the holes at the stem.