Technical data
Table Of Contents
- DESCRIPTION
- INSTALLATION
- CONFIGURATION
- Overview
- Configuration via SSH or USB: menu description
- Start menu
- Setup menu
- IP config menu
- Time setting menu
- Scheduled NTP menu
- UPS config menu
- Services 1 menu
- SNMPv1 config menu
- SNMPv1 community menu
- Email config menu
- Email logic menu
- Miscellaneous menu
- Activation 1 menu
- Services 2 menu
- Wake-On-LAN address menu
- Wake-On-LAN delay menu
- Activation 2 menu
- Sensors Config menu
- I/O Sensors menu
- Security menu
- Save and load menu
- Expert mode
- Configuration of several devices
- FIRMWARE UPGRADE
- SNMPV3 CONFIGURATION
- MODBUS TCP/IP PROTOCOL
- TECHNICAL DATA
- 34 -
FIRMWARE UPGRADE
The NetMan 204 firmware can be updated via HTTP or via FTP.
FIRMWARE UPGRADE VIA HTTP
Connect via HTTP to the NetMan 204 to be upgraded inserting in your web browser the hostname
or IP address and then log in as fwupgrade (default password: " fwupgrade").
Select the file to upload and then press the UPLOAD button.
When the upgrade file is uploaded, the NetMan 204 will reboot automatically.
FIRMWARE UPGRADE VIA FTP
Connect via FTP with the user “fwupgrade” (default password “fwupgrade”) and copy the updated
firmware. Then restart the card by pressing the reset button