Technical data

- 33 -
Save and load menu
/------------------------/
/ Save and load /
/------------------------/
Save changes...:<--
Revert changes.:
Reset default..:
With this menu the configuration can be saved to make it effective or to load other configurations
as described in the following table.
Function Description
Save changes
Saves the configuration in flash memory and then automatically restarts to
make the changes effective
Revert changes
Cancels the changes and reloads the last saved configuration (excluding the
the clock -Time setting- configurations)
Reset default Loads the default configuration
(1)
see paragraph “Configuration of several devices”
Expert mode
Expert mode enables the configuration of advanced parameters that should be set by skilled
technicians. These commands are supported:
help prints the help
get shows all values
set <VAR> <VALUE> set VAR to VALUE
sendtrap <TRAPCODE> send a test SNMP trap
reboot reboot the NetMan 204
factoryreset restore factory configuration
erasefram erase the FRAM module
exit closes the connection
CONFIGURATION OF SEVERAL DEVICES
If several NetMan 204 have to be configured with similar parameters, you can configure the first
NetMan 204, then connect via FTP with the admin user, download all the configuration files in the
folder /cfg, and upload all them via FTP in the folder /cfg of all devices to be configured.