Technical data
Table Of Contents
- DESCRIPTION
- INSTALLATION
- CONFIGURATION
- Overview
- Configuration via SSH or USB: menu description
- Start menu
- Setup menu
- IP config menu
- Time setting menu
- Scheduled NTP menu
- UPS config menu
- Services 1 menu
- SNMPv1 config menu
- SNMPv1 community menu
- Email config menu
- Email logic menu
- Miscellaneous menu
- Activation 1 menu
- Services 2 menu
- Wake-On-LAN address menu
- Wake-On-LAN delay menu
- Activation 2 menu
- Sensors Config menu
- I/O Sensors menu
- Security menu
- Save and load menu
- Expert mode
- Configuration of several devices
- FIRMWARE UPGRADE
- SNMPV3 CONFIGURATION
- MODBUS TCP/IP PROTOCOL
- TECHNICAL DATA
- 27 -
Wake-On-LAN address menu
/------------------------/
/ Wake-on-LAN address /
/------------------------/
MAC Address 1..:00-12-3F-2B-F6-6F
MAC Address 2..:aa-bb-cc-dd-ee-ff
MAC Address 3..:00-00-00-00-00-00
MAC Address 4..:
MAC Address 5..:
MAC Address 6..:
MAC Address 7..:
MAC Address 8..:
With this menu is possible to insert up to 8 MAC address to execute Wake-on-LAN.
Please make sure that your PC supports this function, and that it is correctly configured.
Wake-On-LAN delay menu
/------------------------/
/ Wake-on-LAN delay /
/------------------------/
Address 1 delay:2 sec.
Address 2 delay:40 sec.
Address 3 delay:2 sec.
Address 4 delay: sec.
Address 5 delay: sec.
Address 6 delay: sec.
Address 7 delay: sec.
Address 8 delay: sec.
With this menu is possible to insert the delay times for each Wake-on-LAN.