Technical data
Table Of Contents
- DESCRIPTION
- INSTALLATION
- CONFIGURATION
- Overview
- Configuration via SSH or USB: menu description
- Start menu
- Setup menu
- IP config menu
- Time setting menu
- Scheduled NTP menu
- UPS config menu
- Services 1 menu
- SNMPv1 config menu
- SNMPv1 community menu
- Email config menu
- Email logic menu
- Miscellaneous menu
- Activation 1 menu
- Services 2 menu
- Wake-On-LAN address menu
- Wake-On-LAN delay menu
- Activation 2 menu
- Sensors Config menu
- I/O Sensors menu
- Security menu
- Save and load menu
- Expert mode
- Configuration of several devices
- FIRMWARE UPGRADE
- SNMPV3 CONFIGURATION
- MODBUS TCP/IP PROTOCOL
- TECHNICAL DATA
- 21 -
Services 1 menu
/------------------------/
/ Services 1 /
/------------------------/
SNMPV1 config..:<--
SNMPV1 communit:
Email config...:
Email logic....:
Miscellaneous..:
Activation 1...:
With this menu the configuration screens of the various services can be accessed as described in
the following table.
Menu Function
SNMPV1 config
To configure the SNMP service
SNMPV1 community
Email config
To configure the e-mail service
Email logic
Miscellaneous To configure the other options
Activation 1 To configure the services to be activated
As well as being configured, the services must also be activated to function correctly (see
paragraph “Activation menu”). It is recommended to activate only the services used.