Specifications

/
59
STATIC STABILIZERS
STABILOG-EL 1 RANGE
APPLICATIONS
•information technology
•control electronics (Industrial PLCs)
CHARACTERISTICS
•extremely high reliability (electronic control)
•high level quality of the voltage
(+/-3% with response speed to fluctuations of 2 ms/V)
•high level stability of the voltage:
insensitive to load, frequency, power factor
variations
•low consumption (efficiency=98%)
•extra high protection of the load
(EMI/RFI filters for protection of the load against
conducted radio-disturbances; overcurrent protection)
•low impact on the mains supply:
induced harmonic distortion <0.2%
•maximum flexibility: possibility of connecting 3
single-phase stabilizers to power even an unbalanced
three-phase load (independent phase regulation)
data
Technical
MODELS
EL05 EL10 EL20 EL40
Rated input voltage c.a. single-phase 230Volt 48/52Hz
Input Voltage
range
from 188 to 262 Volts (+14/-18%)
Output voltage a.c. single-phase 230V +/- 3% (independent of the load)
Rated power 500VA1000VA2000VA4000VA
Rated current 2.2A4.3A8.7A17.4A
Regulation speed 2 ms/Volt
Possible variation of the load From 0 to 100%
Power factor of the load Any
Harmonic distortion introduced <0,5%
Efficiency 98%
Operating temperature -10/+40°C
Indications Mains supply present/absent in input
Switch, Switch, Switch Switch
Equipment
fuse fuse fuse fuse
1 Shuko outlet, 1 Shuko outlet, Two Shuko outlets, Two Shuko outlets,
Connections
cord cord terminal block terminal block
Description Power Weights Dimensions Code
(Kg) (HWD) mm
STABILOG EL05 500VA 7.7 204x164x187 S2TM0K5C030RU
STABILOG EL10 1000VA 8.3 204x164x187 S2TM001C030RU
STABILOG EL20 2000VA 19.5 280x226x347 S2TM002C030RU
STABILOG EL40 4000VA 25.6 280x226x347 S2TM004C030RU
Table Codes
weights, dimensions