Specifications
43
data
Technical
MODELS
DPC2 30 DPC2 40 DPC2 60 DPC280 DPC2 200 DPC2 250 DPC2 300 DPC2 400 DPC2 500 DPC2 600 DPC2 800
12 pulses 12 pulses 12 pulses 12 pulses
RECTIFIER INPUT
Rated power (kVA) 3 0 4 0 6 0 8 0 20 0 25 0 3 0 0 40 0 5 0 0 60 0 8 0 0
Rated voltage 380-400-415V three phase
Voltage range +15/-15%
Frequency range 50/ 60 Hz ± 5%
Distortion of the current absorbed up to 5%
RECTIFIER OUTPUT
Ripple < 1%
INVERTER OUTPUT
Rated power (kVA)
cos
w 0.8
30 40 60 80 200 250 300 400 500 600 800
Rated power (kW) 24 32 48 64 160 200 240 320 400 480 640
Number of phases 1 3 + N
Rated voltage [V] 380-400-415V three phase +N
Crest factor at rated power (Ipeak/Irms) 3 : 1
Waveform Sinewave
Static stability ± 1 %
Dynamic stability ± 5 % in 5 ms
Rated frequency 50 Hz
Frequency stability
- Without synchronism ± 0,05 %
- With synchronism on mains ±2 %
Overload 125/150% of the rated current for 10’/1’
BATTERY
Type Maintenance-free sealed lead-acid
Maximum recharge current [A] 0,2 x C10
BYPASS LINE
Rated current [A] 130 174 261 348 290 362 435 580 725 870 1160
Rated voltage [V] 220-230-240 single-phase 400V three-phase
Rated frequency 50 / 60 Hz
INFORMATION ABOUT THE SYSTEM
1150 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800
Dimensions (HWD) 650 1100 1100 1100 1500 2160 2360 2920 3880 4780 4780
700 800 800 800 900 900 900 900 900 900 900
Weights (Kg) VERSION
DIALOG POWER 260 470 610 750 2100 2500 2800 4000 4500 5000 5500
CENTRE CLEAN (TDHi<6%)
Efficiency 91 91 91 91 92 92 93 93 94 94 94
Standard interface RS232/C-ESD input / Dry contacts/RS485
Operating temperature 0 + 40 °C
Relative humidity non condensing 95 %
Noise (dBA) 65 65 65 65 65 65 65 65 78 78 78
Protection rating IP20
Color of the cabinet Light gray RAL 7035
Compliance EN50091-1-1, EMC EN50091-2 Lev. A Directives 73/23-93/68-89/336 EEC
SYSTEM CONFIGURATION
The Power Centre2 range features a wide range of options able to solve all your system engineering
problems. These are not single products but real UPS that must be engineered after a careful analysis
of your problems, with particular attention also being paid to standards and system configuration. This
is why we ask you to contact our experts.