Specifications

23
S
CHARACTERISTICS
• Reliable, stabilized, filtered voltage (double on-
line conversion technology (VFI according to
EN50091-3 specifications) with filters for
suppression of atmospheric disturbances
• High level reliability of the UPS: full
microprocessor control static or manual bypass
without interruption
• High level diagnostics: states, measurements,
alarms available on standard LCD display!
• Power factor correction of the load (input power
factor of the UPS, close to 1)
• Very low noise level <40dB(A)
• Low consumption (“Economy Mode” function and
Smart Active Mode to increase efficiency up to 98%).
- Economy Mode: makes it possible to select Line
Interactive (VI) technology for mains powering
of not very sensitive loads for certain periods.
The function is software programmable or can
be set manually from the UPS.
- Smart Active: if the mains supply is out of
range, the UPS will power the load from the
inverter. When the mains supply is within range
again, the UPS will monitor this for a certain
period before switching the load again.
• Simple to install:
- possibility of connecting the UPS both to
single-phase and three-phase mains supply
(PWP 650-800-1000 models)
- output terminal block + 2 IEC outlets for
powering of local equipment (computers,
modems, etc.)
• Easy to position (integrated wheels)
• high level reliability of the batteries
(automatic and manual battery test)
• autorestart at power-up
(software programmable or from control panel)
• low impact on the mains supply (sinusoidal
absorption of the input current on single-
phase/single-phase series)
• Emergency operation: the UPS can be set for
operating only with mains absent (for emergency
lights)
• Back feed protection standard: for avoiding
enrgy feeedback to the mains
APPLICATIONS:
• Local Area Networks (LAN)
• Servers
• Data centers
• Industrial PLCs
• Cash registers
• Emergency devices (lights/alarms)
• Electro-medical devices
• Telecommunications devices
ADVANCED COMMUNICATION
• advanced, multi-platform communication, for all
operating systems and network environments:
PowerShield2 supervision and shut-down
software included, with SNMP agent, for Windows
95, 98, 2000, Me, XP, Mac OSx, 9.x, Linux, NT
4.0, Novell operatisng systems. The UPS is
equipped with a cable for direct connection to
the PC (Plug and Play)
• RS232 serial port
• slot for installation of the mains adapter
• ESD (Emergency Switching Device) contact for UPS
shut-down using remote emergency button