User Manual

PMX 2004/2008 SFP
The PMX-Series panel multiplexers are used to remote
up to four (PMX-2008: eight) intercom panels from
Riedel Artist or Performer 32 matrix systems via a
bre link. Depending on the SFP modul (SM/MM) the
system allows operation of a group of intercom panels
over a distance of up to 500 m (1,600 ft) or 2 km (1.2
miles) in a cost-effective way while reducing setup
time to a minimum.
The PMX-2004 provides four BNCs to connect to matrix
ports or panels plus a duplex LC bre connector.
The PMX-2008 holds two of such modules thus 8
intercom panels can be remoted from the matrix via two
bre links.
The PMX can be used at the matrix end or the panel
end of the bre link by setting a switch at the rear of the
unit to the appropriate position. Status information is
provided by four LEDs on the front panel.
Since the PMX provides a bidirectional transmission for
four (PMX-2008: eight) AES3/EBU signals its not only
allowing for panel distribution but also for the transport
of audio signals. For maximum exibility a combined
setup of panel and digital audio can be used with the
PMX bre link.
Flexible bre option
The exible bre option with exchangeable SFP
modules on LC connectors allows for easy adjustment
of the PMX to distance needs and the existing bre
infrastructure. The SFP modules are available for single-
mode and multi-mode bre.
PMX-2004 SFP (front view)
PMX-2004 SFP (rear view)
SFP Module
Riedel Communications GmbH & Co. KG | Uellendahler Straße 353 | 42109 Wuppertal, Germany
Phone: [phone] - 90 | Fax: [phone] - 99 99 | www.riedel.net