Owner's manual
Partial Files
Product specications are subject to change without notice. This material is provided for information purposes only; Riedel assumes no liability
related to its use. September 2004.
In many installations different setups for various types
of regular productions are stored on a PC. These
setups usually only modify parts of the total system
conguration while the rest is to be kept unchanged.
Since the online conguration needs regular adminis-
tration and i.e. is being auto-tracked to an audio/video
routing switcher, it is being modied regularly, from
once a while to several hundred times each day.
If you´d transfer one of your typical setups from PC to
the online system in such a situation, you´d overwrite
all these changes.
Unlike complete conguration les partial les only
contain certain aspects of the conguration which are
to be added to the online conguration when the partial
le is transferred to the system.
Partial les in Artist are supported down to a command
level, i.e. one can add a single command to a specic
key of a panel without changing anything else.
You can build up a control-room/studio assignment tool
using partial les.
Alternatively you can assign certain types of produc-
tion-setups to specic production facilities. It is an
effective and powerful tool.
Director Software Screenshot
Loading of partial les for non-technical operators is
very simple.
By selecting and deselecting crosspoints on the partial
le X/Y matrix the operator uploads the appropriate
combination of partial les.
Since the labeling of the X/Y matrix is part of the
conguration it perfectly customizes the user-interface
depending on application.
Alternatively partial les can be red directly from panel
keys, GPIs etc. using the Event Trigger Setup of the
conguration software.
Riedel Communications GmbH | Uellendahler Straße 353 | 42109 Wuppertal, Germany
Phone: +49 (0) 202 292 - 90 | Fax: +49 (0) 202 292 - 99 99 | www.riedel.net
Riedel Communications GmbH | Uellendahler Straße 353 | 42109 Wuppertal, Germany
Phone: +49 (0) 202 292 - 90 | Fax: +49 (0) 202 292 - 99 99 | www.riedel.net