Instructions / Assembly
Unpacking and Checking Carton Contents
4
Introduction
T
his Wet/Dry Vac is intended for house-
hold use. It may be used for vacuuming
wet or dry media and may be used as a
blower.
R
ead this owner’s manual to familiarize
yourself with the product features and to
understand the specific usage of your
new Vac.
Carton Contents List
Key Description Qty
A Wet/Dry Vac ................................1
B Tug-A-Long™ Hose .....................1
C Caster ..........................................4
D Caster Foot w/Storage .................4
E Extension Wands .........................2
F Utility Nozzle ................................1
G Filter Nut ......................................1
H Filter Plate....................................1
I Filter .............................................1
J Filter Cage ...................................1
K Owner’s Manual ...........................1
A
B
C
D
E
K
F
G
H
I
J
Remove entire contents of carton. Check
each item against the Contents List found
on the product carton. Contact us at
info@ridgidvacs.com if any parts are
damaged or missing.
1. Turn the dust drum upside down on
the floor.
2.
Inser
t the caster f
eet into the bottom of
drum, as shown (4 places).
3. Push on the caster foot until the foot is
flush with bottom of the dust drum.
4. Insert the caster stem into the socket of
the caster foot, as shown (4 places).
5. Push on the caster until the ball on the
caster stem is inserted all the way into
the socket. You will hear the ball snap
into the soc
k
et and the caster will s
wiv
el
easily when positioning is correct.
6.
T
urn the drum upright.
Caster/Caster Foot Assembly
Caster
Caster Stem
Caster Ball
Pin
Caster
Foot
Hole
Dust
Drum
Available with Select Models Only
Check carton for the list of included
accessories.
L Wet Nozzle ................................1
M Car Nozzle ................................1
N Dusting Brush ............................1
L
M
N
SP6677-5 6, 9, 12 & 16 GALLON.qxd 4/27/10 8:17 PM Page 4










