Operator`s manual

CS6 – English – 21
Job Review
Press the Review key to open the job review screen.
During an inspection, the job review screen opens onto
the most recently captured media. It is recommended to
stop active recordings before previewing as you cannot
view active recordings in progress.
From the job review screen you can view and edit the
open job’s captured media, add notes to individual cap-
tures, choose which captures to include in the report,
enter customer information, and preview the report.
Job Review Tabs
Contact
Enter company information,
customer information, and job
location details.
Photo View and add notes to photos.
Video
Playback and add notes to
videos.
Autolog
Video
Playback and add notes to
Autolog videos
Notes
A text bubble indicates that a
note has been added to this
capture.
Recording
The red dot means a
recording is in progress.
You cannot playback videos
or Autolog videos during
recording.
Excluded
Media
This individual capture is
marked as excluded and will
not appear in the report but is
still part of the job and present
on the inserted USB drive.
Report
Information
View media statistics such
as photo count, video count,
and Autolog video count. View
whether contact information
was entered into report. You
can preview the job report
from this screen.
Entering Job Details
You can add your company’s information, customer in-
formation, and the job location from the contact tab ,
at the top of the job review screen. The information you
enter in the contact tab’s fields is used in the report
header.
1. Press the Review key and navigate to the con-
tact tab .
2. Highlight the subject you want to enter information
for: company, customer, or address. Press the Se-
lect key to open the text form.
3. Highlight the field you want to edit and press the
Select key to open the text box and use the on-
screen keyboard to enter text.
Note: Refer to the Custom Overlay section for in-
structions on how to use the on-screen keyboard.
4. Repeat for other fields and, when done, highlight
the save icon and press the Select key to save
and return to the contact tab .