Operator`s manual

Ridge Tool Company
39
Notes
Trouble Shooting
Problem Probable Fault Solution
Camera video image not seen� No power to SeeSnake� Check power is correctly plugged in or
battery is charged� Press power key on
CS1000 body or keypad�
Connections faulty� Check connections to CS1000 unit from
SeeSnake� Make sure system cable is
rmlyconnectedtotheSystemConnector
on the front left edge of the keyboard�
Batteries low� Recharge batteries or connect to external
power supply�
Flashing Battery Warning Appears� 18 V- Li-Ion batteries low� Recharge batteries� Switch to AC power
(110/220VAC)�