Operator`s manual

30
Ridge Tool Company
Use the left and right Arrow Keys to move
between the three icons that appear on the Main
Menu (from left to right): Settings
, About , and
Job Browser
Menu (from left to right): Settings
� Press the Select Key to open the
Menus� Press the Menu Key
to exit the Main Menu
and return to the Live View�
Customizing Settings
Selecting the Settings icon will bring up a set of
conguration menus. From these menus you can
modify various preferences and settings�
Figure 57 – Settings Menu
Edit Target Media
From this menu you can use the up and down Arrow
Keys
to choose how you want your jobs stored�
Your choices are to store jobs to the internal drive, a
USB drive, or both� The default setting is to write jobs
to the internal drive only�
Figure 58 – Set Job Storage Mode
If you have selected to write new job data to “USB Drive
Only” or “USB + Internal Drive” you will not be able to
open a new job or capture any new media unless you
have inserted a USB drive into one of the two USB
Ports on the front of the CS1000�
Edit Video Options
Selecting Edit Video Options will open the Video Menu�
From here you are given a choice between MPEG4
and MJPEG Capture Mode�
MPEG4 has a higher compression rate and smaller
lesasaresult,butmaynotbecompatiblewithyour
computersystemwhenyouwanttotransfertheles.
Figure 59 – Video Menu
MJPEG format is a less compressed format, but is more
widely compatible on different PC and MAC platforms�
It is the CS1000’s default capture mode�
Size Description
Medium • Smallest le size
• Good for long inspections
Medium-
High
• Average le size
• Good for most inspections
High • Largest le size
• Uses memory quickly, not recommended
Table 4: MJPEG File Size Settings
You can specify your MJPEG settings further by using
the down Arrow Key
to move into the MJPEG
Settings box and then the left and right Arrow Keys
tomovethroughthreelesizeoptions.Referto
Table 4 to learn more about the differences between
thelesizeoptions.
To apply changes use the down Arrow Key
to
navigate to “Save” at the bottom of the screen and
press the Select Key
� This will take you back to
the Settings Menu� Pressing the Menu Key
on the
keypad will take you back one level to the Settings
Menu�