Operator`s manual
Ridge Tool Company
21
Figure 29 – Video Splash Screen
Video and Autolog video can be recorded simultaneously
on the CS1000� To start recording an Autolog video
press the Autolog Key
� The two recordings are
independent of each other so if you start recording a
Video and then start recording Autolog video, you can
start and stop both video types without affecting the
other�
You can also capture additional photos by pressing the
Photo Key
and/or Photo Tag Key � To stop the
Video recording, press the Video Key
one more
time�
Taking Still Photos
To take a Photo press the Photo Key � A splash
screen containing your photo will appear each time you
take one� Notice that the Photo icon on the Dashboard
is highlighted in red indicating that a Photo has just
been taken�
Figure 30 – Photo Splash Screen
You can add notes to Photos during Job Review or
you can integrate annotating your photos into your
inspection process by using the Photo Tag feature�
Adding Notes to Photos
Pressing the Photo Tag Key will take a photo and
open the Issue Tag and Note screen� This screen has a
text box where you can use the keyboard to add notes
to your customer� Notes entered here will be included
in reports alongside the photo they are associated with�
Figure 31 – Issue Tag and Note Screen
Add a Note
1� Press the Photo Tag Key �
2� Use the keyboard to type a note about the photo�
3� Press the the Select Key
on the keypad to
Save your note and return to Live View�
Adding Issue Tags to Photos
The CS1000 has a built-in library of “Issue Tags”
which can be attached to images to describe common
conditions found during pipe inspections, such as
cracks, root intrusions, collapsed pipes, and others�
Refer to Appendix A at the end of this manual for a chart
containing the Issue Tags in your CS1000’s library�
Add an Issue Tag
1� Press the Photo Tag Key �
2� Use the left Arrow Key
to navigate to the
Add Issue Tag button� When the blue highlight
is around the Add Issue Tag button
press the
Select Key
to open up the Issue Tag Library�