Operator`s manual

20
Ridge Tool Company
Figure 27 – “Start New Job” from the Job Manager
Documenting an Inspection
Once you have an open Job File, you can start adding
media elements� This section of the manual will cover
the differences between Autolog Video and standard
Video; the difference between Photos and Photo Tags,
using Issue Tags and Notes; annotating inspections by
voice and adding new sessions�
Press the Photo Key
to take a photo� Press the
Photo Tag Key
to take a photo and open the Issue
Tag and Note form� Press the Video Key
to start
recording a video or press the Autolog Key
to start
recording an Autolog Video�
Performing Inspections with Autolog
Recording an Autolog video is an great way to capture
a highly compressed video of an entire inspection� A
key benet of recordingAutolog video over standard
video is the smaller le size. The smaller le size
makes exporting faster�
Press the Autolog Key
once to start recording an
Autolog video� A splash screen will appear at the start
of each Autolog recording� Notice that the Autolog icon
on the Dashboard is highlighted in red indicating that
an Autolog video recording is in progress�
An Autolog recording saves screen images in a motion
JPEG video format at the rate of four frames per
second� If no change in position or view is detected
from the counter because the camera is not moving,
the CS1000 will stop adding new frames until the
camera moves again�
Figure 28 – Autolog Splash Screen
Audio records continuously during autolog video
recording even if the camera is not capturing new
frames� To record an Autolog video without audio
press the Microphone Mute Key
� This will mute
the microphone, and record the Autolog video without
audio�
You can capture additional photos or higher-quality
video clips while recording an Autolog video by pressing
the Photo Key
, Photo Tag Key , or the Video
Key
� To stop the Autolog video recording, press the
Autolog Key
one more time�
Recording Video
Press the Video Key to start recording a video� A
splash screen will appear at the start of each Video
recording� Notice that the Video icon on the Dashboard
is highlighted in red indicating that an Autolog video
recording is in progress�
To record video without audio press the Microphone
Mute Key
� This will mute the microphone, and
record video without audio�