Operator`s manual

2 - English
TM
• Do not use equipment if the power switch does
not turn it ON and OFF� Any equipment that cannot
be controlled with the power switch is dangerous and
must be repaired�
• Disconnect the plug from the power source and/
or the battery pack from the equipment before
making adjustments, changing accessories, or
storing� Preventive safety measures reduce the risk
of injury�
• Store idle equipment out of the reach of children
and do not allow persons unfamiliar with the
equipment or these instructions to operate the
equipment� Equipment can be dangerous in the
hands of untrained users�
• Maintain equipment� Check for misalignment or
binding of moving parts, missing parts, breakage
of parts, and any other condition that may affect
the equipment’s operation� If damaged, have the
equipment repaired before use� Many accidents are
caused by poorly maintained equipment�
• Use the equipment and accessories in
accordance with these instructions; taking into
account the working conditions and the work to
be performed� Use of the equipment for operations
different from those intended could result in a
hazardous situation�
• Use only accessories that are recommended by
the manufacturer for your equipment� Accessories
that may be suitable for one piece of equipment may
become hazardous when used with other equipment�
• Keep handles dry, clean, and free from oil and
grease� This allows for better control of the equipment�
Battery Use and Care
• Recharge only with the charger specified by the
manufacturer� A charger suitable for one type of
battery pack may create a risk of fire when used with
another battery pack�
• Use equipment only with specifically designated
battery packs� Use of any other battery packs may
create a risk of injury and fire�
• Do not probe battery with conductive objects�
Shorting of battery terminals may cause sparks,
burns, or electrical shock� When the battery pack is
not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small
metal objects that can make a connection from one
terminal to another� Shorting the battery terminals
together may cause burns or a fire�
• Under abusive conditions, liquid may eject from
battery; avoid contact� If contact occurs, flush with
water� If liquid contacts eyes, seek medical help�
Liquid ejected from the battery may cause irritation
or burns�
• Use and store batteries and chargers in
dry, appropriate temperature areas� Extreme
temperatures and moisture can damage batteries
and result in leakage, electrical shock, fire or burns�
See charger manual for more information�
• Do not cover charger while in use� Proper
ventilation is required for correct operation� Covering
charger in use could result in fire�
• Properly dispose of batteries� Exposure to high
temperatures can cause the batteries to explode;
do not dispose of in a fire� Some countries have
regulations concerning battery disposal� Follow all
applicable regulations�
Service
Ensure a qualified repair person services your equipment
using only identical replacement parts to maintain
the safety of the tool� Remove the batteries and refer
servicing to qualified service personnel under any of the
following conditions:
• If liquid has been spilled or objects have fallen into
product�
• If the product does not operate normally when
following the operating instructions�
• If the product has been dropped or damaged�
• When the product exhibits a distinct change in
performance�
Specic Safety Information
WARNING
This section contains important safety information
that is specific to the CS10� Read these precautions
carefully before using the CS10 to reduce the risk of
electrical shock, fire, or other serious personal injury�
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE!
Keep this manual with the equipment for use by the operator�
CS10 Safety
• An improperly grounded electrical outlet can
cause electrical shock and/or severely damage
equipment� Always check the work area for a
properly grounded electrical outlet� The presence of
a three-prong or GFCI outlet does not ensure that
the outlet is properly grounded� If in doubt, ensure a
licensed electrician inspects the outlet�