Full Product Manual

16
Push/Pull Handle
Cord Wrap
Power
Cord
Accessory Storage
Your Accessories may be stored in the
Tool Holder or in the two locations on
the Caddy Right/Left.
NOTE: Insert male end of extension
wand into the holder sleeve (not included
on all models) as shown.
Hose Storage
Area
Hose Storage
The Professional Locking Hose may be
stored by wrapping it around the Unit
and plugging the open end into one
of the storage locations on the Caddy
Assembly.
Extension
Wand
Storage
Extension
Wand
Accessory Storage Compartment
(Not Included
On All Models)
CAUTION: Do not operate
vacuum while the hose is still
wrapped around the powerhead
assembly in the storage position.
!
Cord Wrap
When vacuuming is complete, unplug
the Cord and wrap it around the
Powerhead Assembly. Secure the Cord
using the Cord Clip on the Plug.
The Power Cord should wrap under the
Push/Pull Handle (above the Inlet) and
around and under the Cord Wrap of the
Motor Cover.
WARNING:
Do not put any object into
ventilation openings. Do not
vacuum with any ventilation
openings blocked; keep free of
dust, lint, hair or anything that may
reduce air flow.
!
SP6729-5 RIDGID ESF 111418.indb 16 12/3/18 11:18 PM