Technical data

--- 28 ---
Fig. 11
(b) Mounting the Shift Arm [19] and the Shift Knob [39] (see Fig. 12).
Mount the Shift Arm [19] to the protruded side of the Rear Case [18]. At this time, insert the protrusion of
the Shift Arm [19] into the hole of the Rear Case [18] and check that the protrusion is inserted into the
groove of the Slide Ring Gear [21] that is mounted in the Rear Case [18] (see Fig. 5).
Insert the Shift Arm [19] into the groove of the Shift Knob [39] facing "LOW" indication on the Shift Knob
[39] backward.
[28] [18]
[27]
Protrusion
Protrusion
Concave portion
Concave portion
(5) Reassembly of the drive unit
(a) Fit the protrusion of the Motor Spacer [28] in the concave portion of the Rear Case [18] engaging the
pinion of the Armature and Pinion Set [29] with Planet Gear (A) Set (4 pcs.) [25]. Turn it fully clockwise
viewing from the rear of the Armature and Pinion Set [29] (see Fig. 11).
1
2
Top view
Protrusion
[19]
Concave portion
Side view
[39]
Groove portion of slide ring gear
Indication "LOW"
Fig. 12