Use and Care Manual

10 - English
FEATURES
Fig. 2
SWITCH
TRIGGER
BEVEL
LOCK KNOB
BEVEL
LOCK KNOB
FENCE LOCK
KNOB
CARRYING
HANDLE
CARRYING
HANDLE
HEAD LOCK
PIN
BLADE WRENCH
STORAGE
DEPTH
CONTROL KNOB
BEVEL DETENT
LEVER
KNOW YOUR COMPOUND MITER SAW
See Figures 1 - 2.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
12 IN. BLADE
A 12 in. blade is included with your compound miter saw. It
will cut materials up to 15-1/4 in. wide, depending upon the
angle at which the cut is being made.
BEVEL DETENT LEVER
See Figure 3.
Loosen the bevel lock knob before using the bevel detent
lever. Tighten the knob after adjusting to lock the saw in
place.
POSITION 1: (detent disengaged) Allows the blade to be
freely tilted either left or right for custom selection of bevel
cuts.
POSITION 2: (detent engaged) Allows you to easily find 0°,
15°, 22.5°, 33.9°, and 45° at indexed stops.
Fig. 3
BEVEL DETENT
LEVER
2
1
BEVEL LOCK KNOB
See Figure 3.
The bevel lock knob securely locks your compound miter
saw at desired bevel angles. Loosen the bevel lock knob to
release the saw, allowing the blade to be tilted either left or
right for bevel cuts. Tighten the knob to lock the saw in place.