Technical data

Preface

Commissioning Manual

Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1

Safety notices

DANGER

 Commissioning is absolutely prohibited until it has been completely ensured that the

machine, in which the components described here are to be installed, is in full

compliance with the provisions of the EC Machinery Directive.

 SINAMICS devices and AC motors may only be commissioned by suitably qualified

personnel.

 The personnel must take into account the information provided in the technical customer

documentation for the product, and be familiar with and observe the specified danger

and warning notices.

 When electrical equipment and motors are operated, the electrical circuits automatically

conduct a dangerous voltage.

 Dangerous mechanical movements are possible during system operations.

 All the work carried out on the electrical machine or system must be carried out with it in

a no-voltage condition.

 SINAMICS devices with three-phase motors must only be connected to the power

supply via a universal current-sensitive residual current operated device with selective

switching once it has been verified that the SINAMICS device is compatible with the

residual current operated device in accordance with IEC 61800-5-1.

WARNING

 The successful and safe operation of this equipment and motors is dependent on

professional transport, storage, installation and mounting as well as careful operations ,

service and maintenance.

 Information and data from the catalogs and quotations also apply to special versions of

the equipment and motors.

 In addition to the danger and warning information provided in the technical customer

documentation, the applicable national, local, and plant-specific regulations and

requirements must be taken into account.

 Only protective extra-low voltages (PELV) that comply with EN60204-1 may be

connected to all connections and terminals between 0 and 48 V.