Technical data

Commissioning
2.3 Basic Operator Panel 20 (BOP20)
Commissioning Manual
70 Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1
2.3.1.2 Displays and using the BOP20
Features
● Operating display
● Changing the active drive object
● Displaying/changing parameters
● Displaying/acknowledging faults and alarms
● Controlling the drive using the BOP20
Operating display
The operating display for each drive object can be set using p0005 and p0006. Using the
operating display, you can change into the parameter display or to another drive object. The
following functions are possible:
● Changing the active drive object
– Press key "FN" and "Arrow up" -> the drive object number at the top left flashes
– Select the required drive object using the arrow keys
– Acknowledge using the "P" key
● Parameter display
– Press the "P" key.
– The required parameters can be selected using the arrow keys.
– Press the "FN" key -> parameter r0000 is displayed
– Press the "P" key -> changes back to the operating display