Technical data

Preparation for commissioning
1.4 PROFINET components
Commissioning Manual
Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1
19
Note
For commissioning with STARTER, the onboard Ethernet interface of the Control Unit can
be used with a crossover cable from CAT5 and higher.
The PROFINET module CBE20 supports all standard Ethernet cables and crossover
cables from CAT5/5e and higher.
2. Connecting cable
Connecting cable between PROFINET adapter and programming device/PC, such as
– Industrial Ethernet FC TP Standard Cable GP 2 x 2 (up to max. 100 m)
Standard bus cable with rigid conductors and a special design for fast installation
Order No.: 6XV1840-2AH10
– Industrial Ethernet FC TP Flexible Cable GP 2 x 2 (up to max. 85 m)
Order No.: 6XV1870–2B
– Industrial Ethernet FC Trailing Cable GP 2 x 2 (up to max. 85 m)
Order No.: 6XV1870–2D
– Industrial Ethernet FC Trailing Cable 2 x 2 (up to max. 85 m)
Order No.: 6XV1840–3AH10
– Industrial Ethernet FC Marine Cable 2 x 2 (up to max. 85 m)
Order No.: 6XV1840–4AH10
3. Connector
Connector between PROFINET adapter and PG/PC, such as
– Industrial Ethernet FC RJ45 Plug 145 for Control Unit
Order No.: 6GK1901-1BB30-0Ax0