Technical data

Commissioning
2.13 Commissioning linear motors (servo)
Commissioning Manual
134 Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1
You can select a standard motor from the list of motors. You can enter the motor data for
third-party motors manually. The number of parallel primary sections (p0306) must be
entered.
Figure 2-34 STARTER screen, linear motor selection 1FN3
2. Enter motor data
The following motor data must be entered for third-party motors:
Table 2- 20 Motor data
Parameter Description Comment
p0305 Rated motor current -
p0311 Motor rated velocity -
p0315 Motor pole pair width -
p0316 Motor force constant -
p0322 Motor velocity, maximum -
p0323 Maximum motor current -
p0338 Motor limit current -