Use and Care Manual

14 – English
TROUBLESHOOTING
ILLUSTRATIONS START ON PAGE 15
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
PROBLEM POSSIBLE CAUSE SOLUTION
Tool does nothing or
operates sluggishly
Inadequate air pressure supply
Worn or damaged O-ring seals or bumper
Exposure to low temperatures
Exposure to high temperatures
Verify adequate air supply. Add air
to the tool through the air fill valve.
Contact authorized service center
for repair.
Allow tool to warm to proper operat-
ing temperature.
Allow tool to cool to proper operating
temperature.
Tool jams frequently Incorrect fasteners
Damaged fasteners
Loose magazine
Dirty magazine
Worn or damaged driver
Verify that fasteners are the correct
size.
Replace fasteners.
Tighten screws.
Clean magazine.
Contact authorized service center
for repair.
LED LIGHT FUNCTIONS
TOOL STATUS LED LIGHT SCENARIO ACTION REQUIRED
Normal Solid Green Light (No Flashes) No Action Needed
Low Battery Solid Red Light (No Flashes)
Recharge or Replace Battery. If problem
persists, contact an authorized service
center for repair.
Jam Mode Flashing Red Light
Clear Jam – See Clearing a Jammed
Fastener in Operations.
This product has a 90-Day Satisfaction Guarantee Policy,
as well as a Three-year Limited Warranty.
For Warranty and Policy details, please go to powertools.ridgid.com
or call (toll free) 1-866-539-1710.