Specifications

Maintenance

WARNING: For your own safety, turn switch “OFF”

and remove plug from power source outlet before

maintaining or lubricating your drill press.

Frequently blow out any dust that may accumulate inside

the motor.

A coat of automotive type paste wax applied to the table

and column will help to keep the surfaces clean.

WARNING: To reduce the risk of shock or fire haz-

ard, if the power cord is worn or cut, or damaged in

any way, have it replaced immediately.

Lubrication

All of the ball bearings are packed with grease at the fac-

tory. They require no further lubrication.

Periodically lubricate the table elevation mechanism, the

splines (grooves) in the spindle, and the rack (teeth of the

quill). See “Getting to Know Your Drill Press”.

Wiring Diagram

Motor

Motor Cord

Power Cord

Light

Power

Switch

Light

Switch

Black Jumper

Black

Wire

Green

White

Black

Green

Connector

Green

Black

White