Specifications

26. On-Off Switch...Has locking feature. This feature is

intended to prevent unauthorized and possible haz-

ardous use by children and others.

Insert key into switch.

NOTE: Key is made of yellow plastic.

To turn drill ON, insert finger under switch lever and pull.

To turn drill OFF, push lever in.

NOTE: In an emergency: If the drill bit binds, stalls, stops

or tends to tear the workpiece loose, you can quickly turn

the drill off by hitting the switch with the palm of your

hand.

To lock switch in OFF position, hold switch IN with one

hand and remove key with other hand.

WARNING: For your own safety, always push the

switch “OFF” when drill press is not in use,

remove key and keep it in a safe place, also, in the

event of a power failure (all of your lights go out)

or blown fuse or tripped circuit breaker, turn

switch off, lock it and remove the key. This will pre-

vent the drill press from starting up again when

the power comes back on.

Key

Getting To Know Your Drill Press (continued)