Compatibility Chart

Ridge Tool Company10
K-50 Drain Cleaning Machine
Accessories
Only the following RIDGID products have
been designed to function with the K-50 Drain Cleaning
Machine. Other accessories suitable for use with other
tools may become hazardous when used on the K-50. To
prevent serious injury, use only the recommended ac-
cessories.
NOTE! See Ridge Tool Catalog for complete list of tools
and accessories.
Maintenance Instructions
WARNING
Make sure machine is unplugged from power
source before performing maintenance or making
any adjustment.
Lubrication
Lubricate machine with grease at grease fitting (located on
jaw housing) once a week if used every day; once a
month if used less. Place a drop of oil on each of the
bearing points, thrust bearing, clutch jaws, etc., at least
once a year.
Cables
Cables should be thoroughly flushed with water to prevent
damaging effects of sediment and drain cleaning com-
pounds. Periodically lubricate cables and couplings with
RIDGID Cable Rust Inhibitor.
WARNING
Catalog Model
No. No. Description
59235 A-14-6 6′ Rear Guide Hose
84325 A-14-10 10′ Rear Guide Hose
59270 A-18 Front Guide Hose Assembly
59210 A-10 Cable Carrier (Holds 90′ C-8, C-9)
59205 A-1 Left-Hand Mitt
59295 A-2 Right-Hand Mitt
59230 A-13 Pin Key,
5
/
8
″ Cable
Accessories
Catalog Model
No. No. Description
62990 T-201 Straight Auger, 5″ Long
62995 T-202 Bulb Auger, 1
1
/
8
″ O.D.
63000 T-203 Bulb Auger,
7
/
8
″, O.D.
55457 T-225 Retrieving Auger
62067 T-201A Straight Flex Auger
63065 T-217 Drop Head, 4″ Long
54837 T-204 “C” Cutter, 1″
63005 T-205 “C” Cutter, 1
3
/
8
″
63010 T-206 Funnel Auger, 3″ Long
63015 T-207 Spiral Cutter, 1
1
/
4
″
63020 T-208 Spiral Cutter, 1
1
/
2
″
63025 T-209 Spiral Cutter, 2″
63030 T-210 Grease Cutter, 1″
63035 T-211 Grease Cutter, 1
3
/
8
″
63040 T-212 Grease Cutter, 1
3
/
4
″
63045 T-213 4-Blade Cutter, 1″
63050 T-214 4-Blade Cutter, 1
3
/
8
″
63055 T-215 4-Blade Cutter, 1
3
/
4
″
63060 T-216 Chain Knocker, 2″
63280 T-218 Flue Brush, 3″
63070 T-219 Flue Brush, 2
1
/
2
″
63080 T-220 Flue Brush, 2″
63220 T-221 Flue Brush, 1
1
/
2
″
52812 T-230 H-D “C” Cutter, 2″
52817 T-231 H-D “C” Cutter, 2
1
/
2
″
52822 T-232 H-D “C” Cutter, 3″
48482 T-250 Tool Set includes:
– T-203 – T-217
– T-205 – A-13
– T-210
Tools for C-4, C-6, C-7, C-8, and C-9
Catalog Model
No. No. Description
59250 A-17-A Adapter with 25′ x
5
/
16
″ Cable
w/Bulb Auger
59255 A-17-B Adapter with 35′ x
3
/
8
″ Cable
w/Bulb Auger
59265 A-17-C Adapter with 35′ x
3
/
8
″ Cable
w/Male Coupling
92095 A-17-D Adapter with 250′ x
5
/
16
″ Cable
w/Bulb Auger
92100 A-17-E Adapter with 250′ x
5
/
16
″ Cable
w/Drop Head
Adapters with Cable
Catalog Model
No. No. Description
62225 C-1 25′ (7.6m) w/Bulb Auger
56782 C-1IC
5
/
16
″ x 25′ (7.6m) Inner Core
w/Bulb Auger
89400 C-21 50′ (15.2m) w/Bulb Auger
62235 C-2 25′ (7.6m) w/Drop Head Auger
56787 C-2IC
5
/
16
″ x 25′ (7.6m) Inner Core
w/Drop Head Auger
89405 C-22 50′ (15.2m) w/Drop Head Auger
62245 C-4 25′ (7.6m) w/Male Coupling
62250 C-5 35′ (10.7m) w/Bulb Auger
62260 C-6 35′ (10.7m) w/Male Coupling
96037 C-6IC 35′ (10.7m) w/Male Coupling
62265 C-7 7
1
/
2
′ (2.3m) Tight-Wind
62270 C-8 7
1
/
2
′ (2.3m) All-Purpose Wind
51317 C-9 10′ (3.1m) Heavy-Duty Wind
Cables