User Manual

TGR11003 68-74 Nova TigerCage

Shoulder Harness Bar Kit

Shoulder Harness Bar

1 T084-1 Shoulder harness bar

2 T002 Clamp tab

1 T037P TigerClamp P (threaded)

1 T038P TigerClamp P

1 T037D TigerClamp D (threaded)

1 T038D TigerClamp D

1 Tube of Anti-Seize

Hardware:

8 3/8” x 1” USS SHCS Clamps

2 ½” x 1 ½” 12 point Gr. 8 bolt Bar to clamp tab

2 ½” Flange nut Bar to clamp tab

PAGE 1
TGR11003 68-74 Nova TigerCage Shoulder Harness Bar Kit Shoulder Harness Bar 1 T084-1 2 T002 1 T037P 1 T038P 1 T037D 1 T038D 1 Tube of Anti-Seize Hardware: 8 2 2 Shoulder harness bar Clamp tab TigerClamp P (threaded) TigerClamp P TigerClamp D (threaded) TigerClamp D 3/8” x 1” USS SHCS ½” x 1 ½” 12 point Gr.
PAGE 2
TGR10003 Installation Instructions • • • • • Use Anti-Seize on all fasteners that are threaded into stainless clamps or brackets. Install all bars before final tightening. Always tighten the tab side of the clamp first. Torque all 3/8” fasteners to 45 ft-lbs and all 1/2” fasteners to 75 ft-lbs. Make sure the clamp is exactly where you want it before tightening as the clamp may scratch the tubing. 1.